DPC-10 Clam Shell Sealing
The DPC-10 hand-held clam shell sealer is a basic, low cost constant heat sealer. When sealing clam shells, the operator takes the unit and inserts the edge of the clam shell into the jaws and squeezes the handles together. After 2 or 3 seconds the clam shell will melt together and form a seal. Not all clam shells are equal. Some of the cheaper clam shells are difficult to seal as the plastics used in the shell are of lower quality. We recommend testing to ensure a good fit.
Light weight sealer seals or "welds" OPS, PSP, PVC, EPS cases and is ideal for clam shells.
This constant heat device is standard with high and low settings. High impact plastic housing with maintenance free Teflon coated sealing surfaces on the jaws.
- 110-240V single phase, 14.5 watts and weighs 12 ounces.
- Seal is 1 cm by 4 mm (about .4 x .16 inches)
- Low Setting: 180°C/360°F
- High Setting: 210°C/415°F
- Shipping weight 2 pounds