DPC-100 Multi-Point Clam Shell Sealer
A faster way to seal clam shells with multiple seals.
How to seal a clam shell quick? The DPC100 seals up to adjustable sealing points. Seal six points on the clam shell in 2-3 seconds. Now manufactured with lighter weight wood construction.
The side support rails and individual point sealer assemblies are adjustable to accommodate packages up to 8" wide by 13.5" long by 3.75" depth top and bottom (7.5" total container depth).
The operator determines what points need to be sealed and locks the upper and lower sealing points into place. A clam shell is inserted and rests on springs. When the top is lowered the jaws come into contact with each other and the sealing begins. The DPC100 uses constant heat sealing points.
The above sealer seals three sides. Need four? We have modified the above sealer to seal on all four sides! If you are sealing the same size clam shell we might be able to do all four sides at the same time. Send us a dozen samples and we will analyze them to determine if we are able to modify the machine. Four side sealing machines will be quoted upon the modifications required. Call us at 800-311-6167 for quotes on these machines.
- 110-240V single phase, 14.5 watts per point sealer assembly with power strip to accommodate 6 Point Sealer Assemblies.
- Each Seal is 1 cm by 4 mm (about .4 x .16 inches)
- Low Setting: 180°C/360°F
- High Setting: 210°C/415°F
- Cord Length: 8 feet.
- Length: 18 1/2 inches.
- Width: 15 1/2 inches.
- Height: 12 inches.
- Shipping Weight: 50 lbs.