Microcell

Microcell ink rolls are the most durable rolls available on the market today. This material is an extremely tough, hard density urethane foam which will last up to a year or more under normal conditions.

Find your specific size by going to the type or roller you need. On the individual product pages below, you can select 1, 2, 3, or 4 inch wide rollers. 

Inking Instructions for Microcell Rollers: Fill a container with coder ink to a level deep enough to completely submerge the roll. Carefully place the roll into the container of ink. DO NOT ROTATE THE ROLL TO COAT THE ENTIRE SURFACE. Let the roll soak until it is completely submerged. It is very important that you do not rotate the roll once you have placed it in the ink container. If the surface of the roll is completely covered, it will not allow the air to escape out of the top surfaces and therefore proper inking will not be obtained.