Universal Type FD Marker Ink is a fast drying petroleum base inks which is formulated for use in refillable felt tip marking pens only. These dye type inks contain translucent dye colorants which are best used to mark on materials with light colored surfaces. The Type FD Inks dry in a few seconds and are use for both porous and non-porous surfaces. Call for more info.
Universal Type D Stencil Ink is an alcohol base, non-porous, heavily pigmented ink formulated for use with roller and pad stenciling systems. This ink is weather proof and fade resistant and dries in approximately 1 minute at 75 degree F. temperatures. Formulated specifically for marking on metals, plastics, glass and other non-porous surfaces. Also excellent for marking on wood crates, pallets and other porous surfaces where fade and weather resistance is required. Suitable for use in Non-Porous Coders with resulting dry times of 10-15 seconds.
Universal Type M Stencil Ink is an alcohol base, non-porous, heavily pigmented ink formulated for use with roller and pad stenciling systems and Non-Porous Coders. This ink is similar in formulation to the Type D Stencil Ink but dries in half the time. Recommended for applications that require stenciling in very cold environments such as refrigerated storage areas or outdoors in cold climates. This ink is not recommended for stenciling applications in warmer temperatures as it will dry out in the rollers very rapidly.
Universal #1150 Coder Inks are high quality glycol base coder inks formulated for use with our HP-100 and HP-200 series hand printers and all fix mounted coders for applications requiring printing on corrugated cartons, paper and other porous surfaces. These inks will never dry on metal, plastic or other non-porous surfaces at normal room temperatures.
Universal #100 Coder Inks are extremely fast drying alcohol base coder inks formulated primarily for marking on plastic, metal, glass, rubber and other non-porous surfaces. These inks are recommended for use with Non-Porous Hand Printers and Non-Porous fixed mount coders. The #100 ink will dry in approximately 2 seconds at 75 degree F. ambient temperatures when applied with a non-porous coder.